Many people have been asking me about image resolution lately.

The most important thing to remember when you trace images to create cut lines is to use the highest resolution version of the image possible. Using low-resolution images results in jagged cut lines.

Many images on the Web are low-resolution because that is all you need for display on the Web (72 dpi). An image created for printing should be 300 dpi and scanning images for retouching should be scanned at 600 dpi if possible.

To determine the dpi (dots per inch) of an image:

On a Mac


In Windows

To see larger versions of the images above, just click on the images.

While I was busy designing something today, I decided to test out the placement of cuts on my KNK Maxx using a Cricut mat and cutting with Make the Cut. I placed masking tape as guides to where I should place my mat before I clamp down the pinch rollers.

In this picture you can see that I placed masking tape
one inch from the right edge of the machine.
Doing this means that I won't have to set my origin every time I cut to my machine using MTC. I sometimes use WinPCSign with my KNK so when I do that, I will either have to go through this process again or just set my origin every time. WinPCSign has more advanced features, but for now, I wanted to set this up with the easier software to use.

I like using Cricut mats with my KNK because I have the machine on an Alex unit from Ikea in the closet in my room so there isn't very much room for me to move the machine back and forth. By using my Cricut mats, I don't need to move my machine at all unless I am working on longer cuts.

At the front of the machine, I placed the masking tape
1-1/2 inches from the beginning of the white cutting strip.
In MTC, I set up four damask shapes, placed on the mat so they would cut at the 6-inch mark at the top and bottom and on the two sides.

From past experience, I know I do not need to use the cutting margins
and I placed my shapes as close to the edges as possible.
I placed my papers on the Cricut mat according to where I placed my
shapes on the cutting mat in MTC
The next images show that my cuts are exactly where I wanted them.




Below is the final shape.



In this layout, I used a technique to keep the letters of my title together after cutting them out. This makes it so much easier to place them on the project nice and straight. It was so simple — all I did was create a very thin rectangle and stretched it across the letters in each word. I then selected the entire word and the rectangle and welded them together. I went through the welding process for each word.
Another great method for making sure you place your letters or elements exactly as you laid them out in your design is to use the negative space as an alignment tool. Just place the negative space over the spot where you want to place your letters or elements. Then put glue in the negative space and then place the letter or element in that space, or use a Xyron sticker maker to put adhesive on the back of your letters or elements first and then just press them in place.
I used a file I purchased from the Silhouette store for the month (September) at the top of the layout, but this is super easy to create yourself.
I typed the word September in a nice thick font and then created a rounded rectangle. I centred the two items and then just slightly overlapped the two.
The above close-up image shows that they are just barely overlapped.
I then welded the two together. Easy peesy!!!
Hope this has been helpful to you.



Last night, I posted my first project for the KNK Design Team and I have been asked if I would share my cutting file. Below is the Zumba t-shirt I made using fabric transfer from KNK USA. The cutting file is in MTC (Make the Cut) format and you can download it by clicking here.

I decided to modify my file for customizing the control panel on my Cameo to include two little holes so that the power and pause lights show through.


You can download my cutting file by clicking *** here ***
I have been wanting to make a "drummers rock" sign out of vinyl for my bumper for the longest time. Well, I finally got it done and I was able to make some good looking drumsticks by tracing a JPG file with one stick, editing it so the lines were straight and everything looked right and then copying it and rotating it to have two sticks.

The text and sticks were cut with my Silhouette Cameo.

The weather will have to get a bit better before I can put it on my car, but it will look very nice. My car is a white 2-door Honda Civic. I will post a picture once I put it on my car.


I will put the sticks on the left side of the text.

I just put it on my car! You can see where I wiped away the dirt. It's such a gorgeous day and all the snow is melting so I couldn't resist.


I made this gift for my sister for Valentine's Day. I used a sketch to create a layout on canvas which she can then put into a 12 x 12 shadowbox type frame. The photo is of her and our mom on her wedding day.

I used the Crate Paper Pink Plum collection.


I placed a cake doily behind the photo
Prima flowers with Stickles

Prima bling
Heart-shaped button from my stash
The flowers were originally white and I used Frost and Crème de Rouge Glimmer Mist and Star Dust Stickles to match the colours of the layout. I prefer buying white or clear flowers and bling so I can use mists, sprays or markers to colour them for the project at hand.

I will be giving away a package of Prima "Say it in Pearls" in red and black -- just perfect for Valentine's Day!! Please leave me a comment and I will pick someone at random on Sunday night, February 12.

Prima Say it in Pearls

I hope you enjoyed my project and that it encourages you to think outside the box.